Mini Cooper tahavaatepeeglite kleebised

Sobib:
R55: 2012/12-2014/06 Clubman: Cooper and Cooper S
R56: 2005/11-2013/11 Hatchback: Cooper and Cooper S/D
R57: 2007/10-2015/06 Convertible: Cooper and Cooper S
R60: 2010/01-2016/10 Countryman: Cooper and Cooper S/D
R61: 2012/03-2016/09 Paceman: Cooper and Cooper

R series rearview mirror cover

Feature:

Protect the original car

Tailored

How to judge Automatic folding or Manual folding?

Comaprision before and after installation

Example after installation

3D scanning arc, original car mold

PC material high-gloss paint treatment

The use of PC engineering materials, electroplating and polishing processes, high-gloss paint treatment, clear patterns, abrasion and scratch resistance, provide a stronger protection for the car

Use thick 3M tape, not easy to tear during installation, easier installation

CNC cutting

Using computer numerical control cutting technology to ensure that the cut after cutting is smooth without cutting hands, and will not cause data inconsistency during mass production

Installation steps:

Step 1: comparison
Take out the rearview mirror sticker and place it on the rearview mirror for installation position comparison. Please do not paste directly to prevent the sticker from being crooked (if it is not suitable, please contact the customer service first and then install it, otherwise it cannot be returned or replaced if it is damaged).

Step 2: clean
Please make sure the rear view mirror is clean and use the alcohol package attached to the product to clean the position of the rear view mirror

Step 3: tear the glue
The adhesive surface of the double-sided adhesive will be torn off about 3cm, both sides of the double-sided adhesive need to be torn off after too much paste cant be corrected, tear off too little bad glue

Step 4: heat it up
When the temperature is low, please heat the adhesive position of the double-sided tape and the rearview mirror to improve the stickiness of the double-sided tape

Step 5: align
Attach the rearview mirror Adjust the rearview mirror sticker Installation location Note that the edges are aligned Please note the correction

Step 6: glue
Hold the rear view mirror shell stick to avoid its position
Remember not to pull out the glue surface slowly with too much force
Please do not squeeze when pulling glue to prevent the adhesive surface from breaking

Step 7: complete
Only after the installation is completed will the original product,Tear off the protective film,and the color is brighter now.