LED tuledega kostüüm

LED tuledega kostüüm

NOTICE > due to manual measurement, hard to avoid some error size is cm and inches (parentheses) size, only supplies the reference
The environment Avoid the use of fiber optics products in dust and high humidity, high temperature and pollution environment.Assure ventilated, moisture-proof and waterproof, avoidextrusion during thetransit.Avoid direct exposureto uv radiation and high energy rays use of fiber optic products.Avoid the product together and plasticizer or polymer plasticizer,Plasticizer could be transferred tothe product surface, lead to severe lower optics.Products shouldbe affected by the organic compounds, including benzene, acetone, ethyl acetateThinner, gasoline, etc. Maintain About washing: light-emitting products should not touch the water, if there is stain on the clothes,Local use wet cloth to wipe, can avoid circuit into the water. Clothes when not in use please use hangers to hang up Turn off the power and take out the battery.
Question 1: the first use of LED clothes, connected to the battery, the clothes do not light? Reason 1: battery no electricity or less. Reason 2: clothes on the power switch is not turned on. Reason 3: controller and clothes to loose or fall off (check if the controller in the clothes pocket is properly connected to the clothes) Question 2: some bright lights of the clothes? Reasons 1 : the controller is connected with the clothes the place is not properly connected. 2 : the line fault, please check carefully. Reasons 3 : local light damage, please check carefully. Question 3: the use of remote control without reaction? Reason 1: remote control did not install the battery, when the button is pressed to see whether the red indicator light on the remote control. Reason 2: remote control antenna not pulled out Reason 3: remote control is blocked, unable to transmit the signal. Reason 4:LED clothes on the lack of battery power, resulting in a remote control signal can not be received. Question 4: after receiving the clothes, how to let the clothes light up? Operation steps: Step 1: take out the clothes, the clothes are neatly classified, check whether the accessories are complete, such as the controller in the pocket of clothes, remote control, etc. Step 2: check whether the controller in your pocket is connected to your clothes. Step 3: plug clothes and trousers or headdress connected each other. Step 4: connect the controller in your pocket to the battery. Step 5: open the clothes manufacturer’s power switch, the clothes will shine. s tep 6: if there is a remote control, you can use the remote control.