Auto rehvirõhu rõhumõõtja
How to use:
1. Screw off the cap of the tire valve.
2. Screw the copper nipple of the tire gauge into the tire valve and screw down
3. The tire gauge will show your tire pressure
4. If the tire pressure is too low, please inflate the tire; and if the tire pressure is too high, please open the vent valve to lower the tire pressure.
5. After measuring the tire pressure, please screw off the copper nipple, close the vent valve, make the pointer back to zero, and screw down the cap of tire valve.
 100% brand new and high quality! The tyre pressure guage contained in this kit has a range of 10-100psi and accuracy of 2-3psi. To use, ensure that the guage is set to zero and push the nozzle onto the tyre valve so that a good seal is made between the valve and nozzle-failure to do so can result in an inaccurate reading. Once the nozzle is correctly applied, wait for the pressure reading to stablise and then remove the guage from the valve stem and read the measurement. 0-100 PSI reading With kg/cm2 unit Large easy to read numbers suitable for most tires of bike and car Metal protect shell Lightweight and portable design |
